Tool Green has the hex code #7F7711. The equivalent RGB values are (127, 119, 17), which means it is composed of
48% red, 45% green and 6% blue. The CMYK color codes, used in printers, are C:0 M:6 Y:87 K:50. In the HSV/HSB scale, Tool Green has a hue of 56°, 87% saturation and a brightness value of 50%. Details of other color codes including equivalent web safe and HTML & CSS colors are given in the table below. Also listed are the closest Pantone® (PMS) and RAL colors.
Tool Green is an RAL Design color with the number 100 50 50. Different from the Classic list, the RAL Design catalogue specifies colors for interiors. RAL is a well-known color matching system used in several European countries including Germany, France, Italy and the UK.
Tool Green hex code is #7F7711 with equivalent RGB (127, 119, 17). You can use these along with HSL values in HTML and CSS code to display the color on web pages. Please also note that the CMYK values and the corresponding Pantone (PMS) number mentioned on this page have been calculated from the hex code and are only approximations.
The complement of Tool Green is Dark Imperial Blue with the hex code #11197F. Complementary colors are those found at the opposite ends of the color wheel. Thus, as per the RGB system, the best contrast to #7F7711 color is offered by #11197F. The complementary color palette is easiest to use and work with. Studies have shown that contrasting color palette is the best way to grab a viewer's attention.
The analogous colors of Tool Green (#7F7711) are Avocado (#507F11) and Russet (#7F4011). In the RGB color wheel, these two analogous colors occur to the right and left of Tool Green with a 30° separation on either side. An analogous color palette is extremely soothing to the eyes and works wonders if your main color is soft or pastel.
As per the RGB color wheel, the split-complementary colors of Tool Green (#7F7711) are #11507F (Dark Cerulean) and #40117F (Pixie Powder). A split-complementary color palette consists of the main color along with those on either side (30°) of the complementary color. Based on our research, usage of split-complementary palettes is on the rise online, especially in graphics and web sites designs. It may be because it is not as contrasting as the complementary color palette and, hence, results in a combination which is pleasant to the eyes.
Tool Green triadic color palette has three colors each of which is separated by 120° in the RGB wheel. Thus, #117F77 (Pine Green) and #77117F (Patriarch) along with #7F7711 create a stunning and beautiful triadic palette with the maximum variation in hue and, therefore, offering the best possible contrast when taken together.
The tetradic palette of Tool Green has four colors - #117F77 (Pine Green), #11197F (Dark Imperial Blue) and #7F1119 (Falu Red) in addition to the base color (#7F7711). A tetradic color palette is complex and, in most cases, should not be used off-the-shelf. We suggest tweaking the colors slightly to achieve desired results.
Tool Green square color palette has #117F40 (Salem), #11197F (Dark Imperial Blue) and #7F1150 (French Plum). Quite like triadic, the hues in a square palette are at the maximum distance from each other, which is 90°. Note: For several colors purposes, a square palette may look much better than the tetrad color palette.
Tool Green Color Rainbow Palette
Our Tool Green rainbow color palette is based on the RGB model and consists of 7 colors, just like the traditional rainbow. You might not see a lot of variation in color, especially if the chosen color is dark or extremely light. However, this can lead interesting rainbow palettes that are faded, soft, pastel or dull.